 |  | H-Bar Profile For joining Carbolite sheets together, attach joiner to rafter or purlin support. Place Carbolite sheets into the neoprene gaskets and push into H-Bar in position. Available for 8 mm . | Recommended Spacings ( subject to CARBOLITE engineer specs.) These apply to ALUMINIUM Structures only. | Carbolite Sheet Thickness | Rafter Spacings | Purlin Spacings | | Sheet Width | Rafter Centres | Sheet Width | Purlin Spacings | | | | | | | 8mm | 700m | 3000mm | 700mm | 1600mm | | 8mm | 1220mm | 3000mm | 1220mm | 1600mm | | 10mm | 980mm | 3000mm | 980mm | 1600mm | | Please Note: Rafter and Purlin spacings are based on wind load as indicated in N/m2. As each project varies you should contact your Carbolite agent for information on minimum and maximum spacings. | Spacings are based on the sheets being fixed on four sides. Maximum wind load 600 N/m2. | Spacings are based on the sheets being fixed on four sides. | 200 Times Stronger Than Glass
|
