Accessories

Aluminium Label Carbolite polycarbonate sheet H-Bar Profile

For joining Carbolite sheets together, attach joiner to rafter or purlin support. Place Carbolite sheets into the neoprene gaskets and push into H-Bar in position. Available for 8 mm , 10mm and 16mm twin wall polycarbonate.
Recommended Spacings ( subject to CARBOLITE engineer specs.) These apply to ALUMINIUM Structures only.
Carbolite Sheet Thickness Rafter Spacings Purlin Spacings
Sheet Width Rafter Centres Sheet Width Purlin Spacings
       
       
8mm 700m 3000mm 700mm 1600mm
8mm 1220mm 3000mm 1220mm 1600mm
8mm 1050mm 3000mm 1050mm 1600mm
Please Note: Rafter and Purlin spacings are based on wind load as indicated in N/m2. As each project varies you should contact your Carbolite agent for information on minimum and maximum spacings.

Rafters: Members spanning front to back

Purlins: Members spanning side to side.

Spacings are based on the sheets being fixed on four sides. Maximum wind load 600 N/m2.

 

 

Spacings are based on the sheets being fixed on four sides.

 

200 Times Stronger Than Glass