Clearlite Awnings

 

Clearlite window awnings are the perfect diy install project for the home handyman.Simple installation allows these kits to be sent as a flat pack . Available in multiple kits so you can extend as wide as you like. SEE BELOW FOR HOW TO ORDER THEM.
  The bracket has a rear baseplate size of 300mm.Therefore, these awnings need that amount of fixing to allow installation.They project 940mm point to point and the front curve drops 360mm from top to bottom.Be sure of head height issues as well.
  Kits can be ordered in multiples/modules meaning you can run these awnings through the side of building and houses.Make sure you can secure a bracket at every 1200mm (max) or else this system will not work.

 

Window Awning CHOICES

 Bracket Type  Colour Choices
 Silver Aluminium  3.0mm Opal
 Black Plastic  3.0mm Clear
 Special colours on request for the aluminium bracket only.  3.0mm Bronze
   3.0mm Grey

The material used is 3.0mm solid polycarbonate .This is UV protected and able to withstand strong knocks.Each sheet comes with a gasket to prevent water from leaking through. Each bracket comes complete with fixings of screw bolts only.

 

 

 

 

 

 

 

Window Awning SIZES

 

These awnings are sold as modules. Each bracket is 1000mm in projection and each sheet is cut from a 1200mm sheet. Therefore, when you are working out the size you need, you will be ordering the following.

1) 1200mm x 1000mm                 is one module.

2) 2400mm x 1000mm                 is two modules.

3) 3600mm x 1000mm                is three modules and so on.

 

PLEASE NOTE WE CAN CUT THEM DOWN TO YOUR EXACT WIDTHS.

print | back to top 


Site Map | About Us | Disclaimer | Browser Standards | Log In
Email: info@carbolite.com.au | ABN 66 001 899 501 | Ph: (02) 9674-2500 | Fax: (02) 9674-3787 | Carbolite Pty Ltd © Copyright 2010